好看的国产精品,国产成人剧情av,午夜国产a久久片亚洲最大

參考價	面議

產品詳情

產品名稱 Product：移動橋式三坐標測量機

產品規格 Model：NCA564

技術描述 Technical Description:

A.主機 Machine：

Tornado系列三坐標測量機是LEADER公司21世紀一代移動橋式測量機。

Tornado series is the latest generation of Moving Bridge style high accuracy high speed Coordinate Measuring Machine from LEADER

Tornado測量機集單點探測和模擬掃描技術為一體的高性能檢測設備，可選配同時安裝接觸式和非接觸掃描測頭?；谛乱淮叻€(wěn)定性控制系統，并與精度補償系統進行結合與優化，加上的算法，可實現高速、高精度模擬開環以及閉環掃描。

Tornado serials combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. Based on the new generation of controller combines and optimizes temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning.

結構特點 Design Characteristic

- 固定花崗石工作臺，X、Z軸采用超高剛性航空鋁技術，通過減輕運動負荷從而提高了整機的性能，

是保證穩定性和剛性的結構設計。

- 測量機主導軌采用槽型截面設計，空氣軸承按封閉式靜壓導軌布局，增大了氣膜剛性，提高了Y向氣浮導軌的精度

- 高精度高氣膜剛性的自清潔式預載荷氣浮軸承-三軸均采用大功率驅動器、電機及新型雙級帶減速器，確保傳動準

確，迅速。

- 英國Renishaw進口光柵尺、讀數頭、測頭、測針、控制系統。

- 德國FESTO氣動系統Z軸氣動平衡，可靠、平穩提高定位精度，并具有自保護裝置，提高了Z向的運動特性。

- 日本SMC精密過濾系統，確保導軌長壽命

- 德國GATES柔性鋼絲同步帶傳動，克服了磨擦桿、齒輪齒條、鋼帶等傳動的諸多缺點，無滑差、噪音、高柔性

- Granite fixed worktable, X&Z axis beam has aviation aluminum technology. This structure is the best solution to lighten main carriage’s weight and improve main carriage’s stability and rigidity, so can greatly improves CMM’s performance.

- Granite worktable with integral “dovetail” guide in Y axis, eliminate the pitch and yaw ,also provides superior motion stability.

- Z axis air-balance with self-protection ,improve motion capability.

- Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stabilit, lower noise.

- High precise, rigid, and pre-loaded air bearings on all axes, can ensure the guidance never be damped

- Transmission system uses high-power DC servo motor and new double level tape reducer to ensure rapid and accurate axes

- RENISHAW steel scale

- Famous parts from all over the world are used in every important sub systems

性能指標 Performance Specifications

行程范圍(mm) Measuring Strokes			外形尺寸(mm) Overall Dimension				主機重量 (Kg) Machine Weight	被測工件重量 (Kg) Max. Part Weight
X	Y	Z	Lx	Ly	Lz
500	600	400	1100	1340	2240		700	500
精度指標：（根據ISO10360-2坐標測量機的性能評定標準）(Accuracy is according to ISO 10360 – 2)
允許示值誤差MPE_E (μm) Maximum permissible error of indication of a CMM for size measurement (μm)						允許探測誤差MPE_P (μm) Maximum permissible Probing Error (mm)
2.1 + 3.3L/1000						2.2
動態性能Dynamic Performance
3D運動速度(mm/s)　3D positioning speed						3D運動加速度(mm/s²) 　3D acceleration
750						1800

環境條件要求 Environment Specifications:

測量機室溫度要求：Room Required Specifications
房間溫度 (溫控間) Room Temperature	18～22°C
溫度梯度(時間) Temperature Gradient (in time)	1°C /h
溫度梯度(時間) Temperature Gradient (in time)	2°C /24h
溫度梯度(空間)Temperature Gradient (in the volume)	1°C /m
測量機室濕度要求：Humidity Required Specifications
空氣相對濕度 Relative humidity	55-65％
氣源要求：Air Supply System Required Specifications
最小供氣壓力 Min. air pressure	8 bar [0.8 MPa]
耗氣量Air consumption	0.12-0.45m³/min
電源要求：Electrical requirements
電壓Voltage	220 V ± 10%
頻率Frequency	50/60 Hz
耗電量 (Max Power consumption)	1500VA
電流Current	15 A
允許的的地面振動 Allowed Maximum Floor Vibration
頻率范圍 (Frequency Range)	0 ~ 19 Hz 19~75 Hz > 75 Hz
振幅 (Maximum Amplitude)	0.0011 mm 0.0011~0.002 mm 0.002 mm
用電設備要求接地可靠：接地電阻小于4歐姆 A good earth ground (less than 4 W) is required for reliable operation of the electrical controls.